Downhill Mountain Bike Best Locations

Bet You Do Not Know Some of These Downhill Mountain Bike Locations

Downhill Mountain Bike (DH) is a kind of mountain biking rehearsed on steep, harsh landscape that regularly includes hops, drops, rock gardens and different challenges.

Downhill mountain bike is heavier and more grounded than other mountain bicycles and highlight front and rear suspension with more than 8 inches (200mm) or (20cm) of go, to glide rapidly over rocks and tree roots. In races, a continuous course is characterized on every side by a strip of tape. Depending upon the terrain, riders have a single or double endeavor to achieve the completion line as quick as could be expected under the circumstances, while staying between the two tapes assigning the course. Riders must pick their line by compromising between the shortest conceivable line and the line that can be traveled at the most fastest pace. On the off chance that a rider leaves the course by crossing or breaking the tape they should come back to the course at the point of exit, unless they don’t gain a time advantage from crossing the tape, in which case they can proceed with their run.

Riders begin at interim, regularly seeded from slowest to speediest, and courses commonly take two to five minutes to finish with winning margins being frequently in seconds. Riders are timed with hardware utilized in downhill skiing.

Recommended Places for Downhill Mountain Bike Racing


Notwithstanding being the flattest continent on Earth, Australia has delivered countless internationally famous downhill racers, including Chris Kovarik, Sam Hill, Mick Hannah and Nathan Rennie.

The expansive larger part of Australian downhill riding can be accessed by land transport or by strolling to the highest point of the track (push runs), however the venues at Thredbo and Mount Buller provide lift accessed tracks during the snow less summer months.

Mount Stromlo, which is close to the capital Canberra, facilitated a World Cup Round in August 2008 and the 2009 World Championships.

Downhill Mountain Bike - Cairns

Australia’s first UCI Mountain Bike World Cup was held Cairns in 1994-1995. Taken after by the World Mountain Bike Championships in 1996, setting Cairns on the map as the premier Australian mountain bicycle destination.


Downhill Mountain Bike - Himachal

Downhill Mountain Biking in India is genuinely new. The fundamental and the most well-known downhill mountain bicycle race in India is called Himachal Downhill Mountain Bike Trophy which is organized by Himalayan Mountain Bike Network. This race is led at Ski Himalayas Ropeway and Ski Resort situated in Solang Valley close to Manali which the Mountain Biking Capital of India. This track is 2 km long and the range offers part of characteristic mountain biking trails and fits numerous styles of mountain biking. The trails in this Himalayan locale are open to riders of all aptitude levels.


Downhill Mountain Bike - Doi Suthep

Uneven districts of Northern Thailand offer incredible venues for downhill mountain biking. Chiang Mai is the most renowned area for Downhill Mountain biking in Thailand. The Chiang Mai Downhill Challenge, which were held in November 2012 and 2013 had pulled in World Cup riders, for example, Josh Bryceland, Steve Peat, Brook Macdonald, Sam Dale Edward Masters and Wyn Masters, and a Belgian free rider, Nico Vink. Doi Suthep Mountain is the place most downhill moves make place in Chiang Mai. Tour administrator, for example, X-Biking Chiang Mai offers guided visit or transport services to the trailheads and get the riders once they finish the trails. The Thailand National Championships, which are held in various venues all across Thailand by the Thai Cycling Association likewise draw in numerous riders all across Southeast Asia. The modest living costs, awesome food, warm atmosphere and incredible ridings make Thailand an “absolute necessity visit” place for riders on a budget.

United Kingdom

Inside of the UK the greater part of the fundamental downhill tracks are in the Highlands, Scottish Uplands, Northern England and Wales, as these are more uneven regions. Stronghold William in Scotland is Britain’s World Cup standard track and was the venue for the 2007 World Championships. The UK has a solid race scene with a national arrangement and various local arrangement with solid representation of all age groups present. The nation has created a large number of the world’s top downhill mountain bikers including, world champions Gee Atherton, Steve Peat, Josh Bryceland, Danny Hart, Manon Carpenter and Rachel Atherton. Other British downhill riders includes Brendan Fairclough and Marc Beaumont.

United States

The Sea Otter Classic, held every April at Laguna Seca close Monterey, California, is a noteworthy riding occasion that opens the racing season (course outline). In 2008, experienced racer Mark Reynolds kicked the bucket after an accident at the Sea Otter Classic, highlighting the risks of the game. The 2006 U.S. National Championships were held at the Infineon Racewayin Sonoma, California. In 2007 and 2008 the U.S. National Championships were held in Mt. Snow, Vermont. In 2009 and 2010 the U.S. National Championships were held at SolVista Bike Park in Colorado. Mammoth Mountain, Plattekill Mountain in the Catskills, Brian Head Resort, the Northstar at Tahoe, Moab UT and Attitash & Deer Valley ski resorts are recommended areas to mountain bikers. In the south-eastern United States, Snowshoe Mountain is famous for its extensive mountain bicycle park, camps, and notwithstanding freeriding ranges amid the summer. Vail, Colorado was the site of the 1994 Downhill World Championship. The trail was renamed “’94 Downhill,” is still ridden by numerous downhill bikers today. It was viewed as one of Vail Mountain’s hardest venues.

Mountain Creek Bike Park situated in Vernon, New Jersey is a downhill mountain bike track on the East Coast of the United States. Generally they have facilitated the US Open of Mountain Biking, which is the premier US downhill race. The 2010 U.S. Open had $50,000 in cash and prizes and a $7500 for men’s pro champion. Mountain Creek also hosts the Gravity Series.

Click here for the source of the video.

Specialized Mountain Bike According to Specialty

Things You Might Not Know About Specialized Mountain Bike*

A mountain bicycle or mountain bike is a bike made for rough terrain cycling. Mountain bicycles are ordinarily ridden on mountain trails, other unpaved environment, single tracks, logging roads and fire roads. These sorts of territory ordinarily incorporate rocks, loose rock, roots, loose sand, washouts, trenches, and steep grades (both inclines and declines). Specialized Mountain Bike is worked to handle this territory and the obstacles that are found in it like logs, littler stones, and vertical drop offs.

*this is about the characteristics of the mountain bike specific for different terrain or specialty, not to be mistaken with the brand Specialized

Mountain bicycles can be characterized into four specific classifications in view of suspension:

  • Hardtail: A frame with a front suspension fork and no rear suspension.
  • Soft tail: A frame with little measure of rear suspension, actuated by flex of the frame rather than pivots.
  • Rigid: No suspension, a frame with a rigid fork and fixed rear.
  • Dual Suspension or full suspension: A front suspension fork and back suspension with a rear shock and linkage that permit the back wheel to proceed on pivots.

There are a few diverse specialized mountain bike, normally characterized by the terrain, and in this manner types of bicycles utilized. Styles of mountain bicycle riding and specialized mountain bike have advanced quickly as of late prompting terms, for example, Freeride and “Trail bike” being utilized to segmentation of mountain bicycles.

Definitions for the most broadly utilized terms

Specialized Mountain Bike - FR

Freeride Mountain Bikes – These are like downhill mountain bikes, yet with less accentuation on weight and more on strength. Freeride bicycles have a tendency to have abundant suspension and normally have no less than 7 inches (180 mm) of travel. The parts are worked tougher, thusly heavier, materials. They can be ridden uphill, yet are sloppy and their respectably slack head tube edges make them hard to move while angled up a slope or going at a low speed. They are viable on specialized downhill trails. Frame angles are commonly steeper than those found in downhill mountain bike. This upgrades mobility over and around smaller obstacles. Freeride bicycles normally go by weight from 14 to 20 kilograms (31 to 44 lbs.). The most solid Freeride bicycles are frequently too cumbersome and have an excess of suspension to be ridden uphill as pleasant as different less-durable models, albeit more up to date, more costly bicycles with ample suspension particularly intended to make them effortless to ride uphill.

Specialized Mountain Bike - Trail

“Trail” Bikes – This specialized mountain bike is an improvement of XC bicycles that are by and large utilized by recreational mountain bikers either at purpose-built “Trail parks” or on normal rough terrain trails. They for the most part have around 5″ (120–140 mm) of travel, measure 11 to 15 kilograms (24 to 33 lbs.), and have geometries marginally loafer than XC bicycles, however not as slack as AM bicycles. Illustrations incorporate the Giant Trance, the Trek Fuel EX arrangement, the Specialized Stumpjumper FSR, Polygon Collosus T Series and others. With less of an accentuation on weight, Trail Bikes are normally worked to handle rougher landscape than committed XC bicycles while having marginally less head edges (69-68°) which gives more prominent solidness while going downhill.

Specialized Mountain Bike - SS

Single Speed BikesSingle speed mountain bikes have one set gear ratio. The gear ratio picked relies on upon the landscape being ridden, the strength and aptitude of the rider, and the measure of the bicycle (a bicycle with 29″ wheels regularly requires an alternate gearing than a bicycle with standard 26″ wheels). Frequently single speed bikes are completely rigid, steel-framed bicycles. These are normally ridden by extremely fit people on easy to medium cross-country territory.

Specialized Mountain Bike - XC

Cross-country (XC) mountain bicycles – This specialized mountain bike is planned principally around the order of cross-country racing. Cross-country racing with its accentuation on moving and additional speed and continuance required bicycles that are both lightweight and proficient. In the 1980s and mid 1990s XC mountain bicycles regularly comprised of a lightweight steel hardtail outline with inflexible forks. All through the 1990s XC bicycles developed to consolidate lightweight aluminium casings and short travel (65 to 110 mm) front suspension forks. As of late full suspension plans have turned out to be more common, and the utilization of cutting edge Carbon Fiber composites has permitted bicycle architects to create full suspension outlines under 10 kg. Lately 29″ wheels have turned out to be more prominent as well, the US men’s and ladies’ marathon cross-country races were won on 29ers in 2009 and 2010. The geometry of Cross Country bicycles favours climbing capacity and quick reactions over stability and descending and thus, typical head angles are 70–71°. Albeit proposed for rough terrain use, Cross-Country mountain bicycles with their accentuation on lightweight development are not intended for use on the most steep or extreme landscape.

Specialized Mountain Bike - DH

Downhill Mountain Bike – These kind commonly have eight or more inches (200 mm) of suspension travel. They are built with frames that are solid, yet light, which frequently requires the utilization of more costly combinations and as of late, Carbon Fiber. In the previous couple of years, lighter downhill mountain bikes have been getting beneath the 40 lbs. mark (18 kg). Because of their ordinarily big or high gears, long, extravagant travel and slack geometry angles, downhill mountain bikes are perfect just to ride down dedicated downhill trails and race courses. Downhill bike have the most sag of Mountain Bikes to get adequate traction to go quick over uneven trails. Head Angles are frequently as slack as 62 degrees. A few sorts of bike rate records have been enlisted downhill. Because of the high-speed of downhill riding most bicycles just have one chain ring in the front, an extensive bash guard and a chain guide, however numerous racers are currently utilizing chain guides without bash guard to lessen weight. A few producers have tried different things with plans highlighting inner gearboxes incorporated directly with the frame development. This change wipes out the requirement for the rear dérailleur component however has not been accepted widely because of durability issues with the gearbox amid the requirements of a downhill race.

Specialized Mountain Bike

Of course not to leave out the Specialized bikes (as per the brand). You can find more info on Specialized website. Here are a few of our recommendations:

Specialized epic mountain bike which comes with Carbon Fiber and M5 aluminium alloy.

Specialized Hardrock mountain bike for traditionalist who prefer tough fitted components, 26inch wheels and lightweight aluminium frame.

Specialized Rockhopper which are more expensive than the Hardrock version, supple fork despite basic damping and a little heavy for a hardtail, Shimano and Suntour componentry, curvy frame made from A1 Premium aluminium, increased compliance and tube walls customised for high strength and low weight. Definitely for upgrade enthusiasts.

Specialized mountain bike for kids just like the namesake – for kids and for those parents who want to start ‘em young.

If you are a beginner and are prepared to take on this hobby or sport, try search for some other specialized mountain bike reviews online to check on the prices and the sizing or the type that suit your style. Though we have most of the information you need to start.

Ride free, ride fun!

Original source can be found here.